Functional Safety Products Designed and Built for your Process
The Moore Industries FS Functional Safety Series instrumentation gives you layers of protection that reduce risk and deliver reliable performance when you need it most.
- Designed and built from the ground up for use with confidence in your Safety Instrumented System (SIS).
- Full third-party certification to IEC 61508 eases burden of proven in use on unapproved products.
- SIL 2 and SIL 3 capable product family designed to meet your safety loop instrumentation needs.
- Operating temperature range of -40 to 85°C for the most demanding environments.
All FS Series Instruments Feature:
- Standard 20v/m RFI/EMI Protection: Special circuit and enclosure designs protect against the harmful effects of radio frequency interference (RFI) and electromagnetic interference (EMI).
- Rugged Housing: All instruments are available in either a rugged and durable aluminum DIN-rail case or housed in a field mount explosion-proof or flameproof enclosure.
- Certificates: exida® certificates for Functional Safety Series products are available for download on our website (www.miinet.com) or exida’s website (exida.com).
- FMEDA reports are reviewed and endorsed by exida. Because each report is specific to hardware and firmware versions, all FMEDA reports are sent upon request so we can guarantee that you always have the latest version.
SLA Multiloop & Multifunction Safety Logic Solver and Alarm
The SIL 2/3 capable SLA Multifunctional Safety Logic Solver and Alarm performs as a single or multi-loop logic solver that incorporates enhanced math, voting and logic capability to act on potentially hazardous process conditions in Safety Instrumented Systems (SIS).
Get the Data Sheet or visit the Catalog
SSX/SST Functional Safety HART Isolators
The exida® approved, SIL 2/3 capable 2-wire (loop powered) SSX and 4-wire (line/mains powered) SST Safety Isolators and Splitters provide isolation and signal conversion for your SIS (Safety Instrumented System) needs. These units protect and enhance loops and also pass valuable HART® data from the field transmitter to host systems and vice-versa.
Get the Data Sheet or visit the Catalog
STA Functional Safety Limit Alarm Trip
The exida® SIL 2/3 capable STA Safety Trip Alarm performs as a logic solver and acts on potentially hazardous process conditions, warns of unwanted process conditions, provides emergency shutdown; or provides on/of control in Safety Instrumented Systems (SIS), and traditional alarm trip applications. The 4-wire (line/mains-powered) STA models accept a signal input from transmitters, temperature
sensors and a wide array of other monitoring and control instruments.
Get the Data Sheet or visit the Catalog
STZ Functional Safety Dual Input Smart HART Temperature Transmitters
The SIL 2/3 capable, STZ Functional Safety Smart HART® temperature transmitter is designed for your SIS (Safety Instrumented System). It configures quickly and easily to accept a single or dual input from a wide array of sensors and analog devices located in hazardous and nonhazardous areas. Features of the STZ include device intelligence for sensor drift and corrosion detection, HART access control to prevent unauthorized or accidental reconfiguration, an input-to-output analog accuracy of up to ±0.014°C (±0.025°F) and more.
Get the Data Sheet or visit the Catalog
SRM Safety Relay Module
The SRM Safety Relay Module provides a high level of availability for safety-critical applications and as a part of Safety Instrumented Systems (SIS). It has been developed following the IEC 61508 standard and is certified by exida for single use in Safety Instrumented Systems up to SIL 2.
SFY Functional Safety Frequency-To-DC Transmitter
The SFY Functional Safety SIL 2/3 capable Frequency-to-DC Transmitter with Display, monitors frequency, period, high or low pulse width, and contact closure signals and converts the input signal to a proportional, input-to-output isolated 4-20mA output ready for direct interface with a Safety System, readout instrument, recorder, PLC, DCS, SCADA system.
Get the Data Sheet or visit the Catalog
SLD Functional Safety Programmable Loop Display
The universal SLD PC-Programmable Functional Safety Loop Display features a large integral display that shows real-time process status in mA, percent, or any designated 5-character Engineering units (EGU). It is a SIL 2/3 capable, non-interfering device for use in a safety loop. The SLD Functional Safety Programmable Loop Display is the perfect solution to accurately and reliably display process status in a safety loop.
Get the Data Sheet or visit the Catalog